Click on the image to check the artwork
By certification 
Girder launching machine is an kind of crane that places precast concrete beam into precast pier. This machine can be used not only in plain construction, but also to meet the construction of mountain highway slope, small radius curved bridge, skew bridge and tunnel bridge requirements. And it consist of main girder,front leg, middle leg, rear leg, rear auxiliary leg, lifting trolley, hydraulic system and electrical device.
Main parameters of girder launching machine
Model |
QJ200/50 |
QJ180/50 |
QJ160/50 |
QJ120/40 |
QJ100/30 |
QJ80/30 |
Capacity |
200t |
180t |
160t |
120t |
100t |
80t |
Bridge span |
≤50m |
≤40m | ≤30m | |||
Bridge slope |
Longitudinal slope≤5%, cross slope≤8% |
|||||
Lifting speed |
0.75m/min |
0.9m/min | 1m/min | |||
Cross speed |
3m/min (Lifting trolley&complete launching machine) |
|||||
Long travel speed |
3m/min (Lifting trolley&complete launching machine) |
|||||
Bridge skew angle |
0~45° |
|||||
Curved bridge radius |
≥400m |
≥320m | ≥200m | |||
Note: more model, or more details, please contact us directly.
Girder launching machine Via span settle drawing
Bridge girder launching machine project sites:
Manufacturer (KHICRANES) introduction
1.We are Direct Factory, 18 years’ manufacture and 15 years exporting experience.
2.Special design can be made by clients’ request, no minimum order quantity requirement.
3.Professional design with strict test procedure before leaving factory, top quality guaranteed.
4.24H online contact by 0086 150 3730 4490 (Mobile/whatsapp/wechat).
Main product
http://www.khicranes.com/
